news

Contact

Enterprise: Qingdao Co-nele Group Co., Ltd.

Address: Yuhuangling Industrial Park, Chengyang District, Qingdao City

Sales hotline: 0532-87876387

Company Fax: 0532-89651313

Service hotline: 400-6362101

Domestic sales hotline: 0532-87876387 13608980651

International sales hotline: 086-532-89651307

Website: www.conele88.com

 Website : en.conele88.com  

Accidental treatment when concrete pump trucks are pumped

Your current location: Home >> News >> Company News

Accidental treatment when concrete pump trucks are pumped

Date of release:2019-03-19 Author:Qingdao Konyle Group Co., Ltd. Click:

     Concrete pump trucks are the most commonly used mechanical equipment in construction. However, due to their complicated working environment, they sometimes encounter various accidents during work. Here is a brief introduction to the situation and treatment of accidents encountered by pump trucks.

       1. Pump blockage: The main performance of the blockage is that it can be reversed by pressing the positive pump. In this way, you can press F1, press the positive pump start button to see how much the main system pressure gauge, such as 31.5Mpa, that is, the concrete pump truck is blocked.

       Treatment method: first press the anti-pump start button, let the anti-pump two pressure relief, then hit the block with a hammer, listen to the sound, to determine the location of the pump block, and then remove and clean.


    2, concrete pump car burst: When pumping, because the pipe is thinned when transporting concrete, can not withstand the pressure of pumping concrete, and thus blast. When removing the squib replacement, also pay attention to the reverse pump a few times, then remove it, and then change to the same length of the pipe.

       3, pump truck explosion pipe: hydraulic pipe when subjected to pressure, due to various reasons, it will also blow up, if you encounter such a situation, you do not have to panic, extinguish the pressure after replacing the oil pipe. But sometimes because there is no concrete pump truck tubing that can be replaced, it is best to pump the concrete back to the hopper with the oil allowed to reduce the loss!


4. The pump oil seal flushes the fuel injection: At this time, the engine is turned off, and after the pressure is relieved, the bad seal is taken out and replaced with a concrete pump of the same type.

      Konecra Group specializes in the manufacture of concrete pumping equipment for more than 20 years. The concrete equipment is of various types and high quality. The products are exported to more than 30 countries and regions such as Europe, Asia, Southeast Asia, South America, Africa and Oceania. Adhering to the "customer first principle", we are committed to providing customers with quality pre-sales, sales, and after-sales services, so that our concrete equipment will provide customers with an excellent construction experience. Strong production, management and service teams escort the customer's concrete equipment.


    Through the above introduction, I believe that everyone knows about the accident handling method when the concrete pump truck is pumping. Thank you for your attention to the official website of Qingdao Konyle Group Co., Ltd. www.conele88.com.

 


The address of this article:http://en.conele88.com/news/227.html

Key word:Concretepumptruckprice,Concretepumptruckmanufacturer,Concretepumptruck

Please leave a message for us
Please input the message here, and we will contact you as soon as possible.
name
Contacts
Telephone
Telephone
mailbox
mailbox
address
address